NEWS

Company News

Industry News

FAQ

Business keywords:Manufacturers of Gear Box Motor ,Push Rod Motor ,UAV Motor ,Hub Motor ,Robot Motor and Motor

Search

Micromotor Manufacturer: Only True Motor Explains Common Causes of Micromotor Faults, Shenzhen Micromotor

2020-06-15 11:32

The principle of micro-motor is to install eccentric blocks at both ends of the motor shaft, and use high-speed rotation to generate exciting force to drive the equipment to work. Because of its simple structure, compact, easy installation, can participate in vibration, and does not require transmission devices and many other advantages, it is widely used in various industries. The following micro-motor manufacturer Weizhen Motor will introduce the common causes of micro-motor failures.

1, can not start

First of all, cut off the power supply immediately, observe carefully to see if there is any problem with the wiring, manually check whether the mechanical part is stuck and other faults, and then check whether the cable and coil of the micro vibration motor are energized or leaked, and whether the load is exceeded. If there is no problem with the stator or rotor winding.

new

2. Low insulation resistance

In a humid environment, water is easy to enter into the motor, resulting in low insulation value. In addition, excessive oil stains on the winding are easy to cause the insulation value to drop, and there is also the aging of insulation. In this case, the coil of the micro vibration motor shall be dried.
 
3. Bearing overheating

Through the infrared thermometer, we can accurately and quickly understand the temperature of the bearing, the bearing overheating serious will appear burnt smell and black smoke, or even stuck unable to rotate. This shows that the vibration motor runs at high current for a long time, resulting in high temperature due to lack of oil. In this case, the machine should be shut down quickly, and high temperature resistant grease should be added after the temperature of the micro vibration motor drops. If the bearing is damaged, a new bearing should be replaced.

shenzhen only motor development co., ltd. is focused on the production of stepper motor, push rod dc motor, precious metal brush motor, automotive micro motor micro motor such as national new and high technology enterprises, welcome to inquire.

Previous

Automotive micro-motor: only true motor specific introduction to the application of automotive micro-motor

The specific role of micro motor production in UAV and new energy

Next

Previous

Automotive micro-motor: only true motor specific introduction to the application of automotive micro-motor

Next

The specific role of micro motor production in UAV and new energy

Related News

Shenzhen Weizhen Motor Development Co., Ltd.

On January 18, 2014, the company's annual dinner kicked off at the "Century Imperial Court" hotel. First, the company announced that it had won outstanding employees of the year in its work performance in 2013, and the president and chairman issued bonuses and certificates. The company's general manager made a speech, first of all, affirming the company's efforts and"

2016-03-17

Weizhen Electric Participated in Hong Kong International Spring Electronics Show and International Information Technology Expo

Shenzhen Weizhen Motor Co., Ltd. Exhibition time: April 13-April 16, 2016 Venue: China Hong Kong Convention and Exhibition Centre Hall 5 Booth No.: 5BF39 Main exhibits: DC motor drone motor robot motor hub motor carbon brush motor stepping motor brushless motor push rod motor, etc. Scope of application: smart home car system, medical equipment, household appliances, office automation, robots, drones, digital equipment, rockers, scooters, etc.

2016-04-13

Weizhen motor with hub motor series to participate in the 2016 China International Bicycle Exhibition

The 2016 China International Bicycle Exhibition will be held from May 6 to May 9. The theme of this exhibition is "Integration, Innovation and Development". The "China Exhibition" has accepted 1322 exhibitors and occupied 6853 booths, including 266 bicycle exhibitors, 130 electric vehicles and spare parts exhibitors, 181 cycling equipment exhibitors and 691 bicycle spare parts exhibitors. Our company shares the booth of the anti-moving tire company, booth 1HD0013 in Hall 1. This time, the company only exhibited a series of hub motor products. Hub motors are widely used in balance vehicles, torsion vehicles, electric bicycles, scooters and other products, which are in line with the current concept of "healthy travel, green and environmental protection.

2016-05-11

Hub Motor System and Characteristic Analysis

The in-wheel motor system is usually called the in-wheel motor, and some researchers call it the wheel motor, electric wheel or wheel motor. The English name is mostly "in-wheel motor", and it is also called "wheel direct drive motors" and "wheel motor. In fact, the above terms are strictly inaccurate. The "hub motor, wheel motor and wheel motor" all focus on the motor, while the "electric wheel" focuses on the wheel. From the system point of view, we should refer to the integrated multi-functional system formed by the tight integration of the drive motor and the wheel, that is, the "integrated motor and wheel system". Analysis of the characteristics of the in-wheel motor system Generally, electric vehicles use a centralized motor-driven power system structure. This type of structure has the following advantages:

2016-05-31

Classification and composition of micro motor

Micro motor, also known as micro motor, is a small size, light weight, can meet a variety of use requirements of small power motor, the full name is called micro special motor is also called micro motor, referred to as micro motor. Micromotors, also known as electric motors, are represented by the letter M in the circuit. Its main function is to generate driving torque as a power source for electrical appliances or small machinery. A micromotor is a device that converts electrical energy into mechanical energy. Most micro-motors use the principle of homopolar repulsion, heteropolar absorption and electromagnetism to complete the conversion of electrical energy and mechanical energy.

2019-11-06

A Solution to the Noise of Pusher DC Motor

As we all know, the use of push rod DC motor is very wide, often used in automotive systems, medical equipment, smart home, household appliances, office automation, drones, robots, digital equipment and other fields, the application of push rod DC motor is too numerous to mention, can be said to be everywhere. However, people often worry that the noise of the push rod DC motor is relatively large, but the mechanical noise cannot be completely eliminated. Therefore, we need a solution to the noise of the push rod DC motor. Today, I will talk about it. A solution to the noise of a push rod DC motor.

2019-11-14

Wechat

Mobile website

Hello, classification of motor types. If you have any questions, please contact us. Welcome to submit any questions and suggestions. We will reply to you as soon as possible. Thank you for your help. We serve you wholeheartedly for 7*24 hours

Tel: 86-755-33620888

Fax: 86-755-89600011

E-mail: wzmotor@wzmotor.com.cn

Marketing Center: sales@wzmotor.com.cn

Add: Weizhen Industrial Park, 8 Zhonghao 2nd Road, Xuexiang, Bantian Street, Longgang District, Shenzhen City, Guangdong, China

Copyright Shenzhen Weizhen Motor Development Co.,Ltd   Powered by www.300.cn

SEO

Business License